National Instruments SH160DIN-Bare Wire Switch Cable

National Instruments SH160DIN-Bare Wire (Part Numbers: 782417-01, 781090-03) cable is made to make signal routing between instruments and devices-under-test (DUT) easier. This cable is specifically made to work with the NI PXI-2520, PXI-2521, PXI-2522, PXI-2523, and PXI-2510, enabling accurate and dependable signal routing.

This cable includes a 160-Pin female DIN connector on one end, which connects to the NI PXI-252x series or NI PXI-2510. The other end features multiple connection options, including four 50-pin female D-SUB connectors, a second 160-Pin DIN connector, and eight bundles of unterminated, tinned, and stripped wires (labeled P1-P8).

With a maximum voltage rating of 150 V (CAT I) and a maximum current per pin of 2 A, the SH160DIN-Bare Wire cable prioritizes dependability and safety during operation. It is imperative to remember that, in order to protect user safety, this cable should not be connected to mains supply circuits.

Temperatures for operation and storage are, respectively, 0 °C to 55 °C and -20 °C to 70 °C. The cable is suitable for indoor use only and can operate at altitudes of up to 2,000 m. It also meets with safety regulations for electrical equipment as specified by IEC, EN, UL, and CSA, among others (61010-1, 61010-1, 61010-1).

This cable must be used with shielded accessories in order to comply with Electromagnetic Compatibility (EMC) regulations. The flexibility and compatibility of the SH160DIN-Bare Wire cable are further improved by third-party accessories including 50-position male D-SUB connectors at a right angle and VARIOFACE modules with screw connections and 50-position D-Subminiature male connectors.